Cutter Accessories (Laser Head for S9 Engraver), 90W Laser Head Replacement for S9 Laser Cutting Machine, 5.5–6W Diode Spot Compression Laser, SCULPFUN Laser Modules for S9 Laser Engraver

【Replacement Parts of Broad Compatibility】 - The SCULPFUN laser module features an ingenious structural connection mechanism that is broadly compatible.

It can be effectively matched to various laser engraving, cutting, 3D printing, CNC machining, and other devices.

It can be placed on several DIY equipment or laser engraving machines from different brands.

The S9 laser head utilizes the most recent 5.5W laser beam shaping technology, which produces a very high-density energy laser beam that is extremely thin throughout, rather than just at the focus.

Its ultra-fine 0.06mm sharp laser focus allows it to cut through materials up to 15 mm thick, 10 mm acrylic, ceramics, and stainless steel with remarkable penetration and precision.

This is about twice as powerful as a 90W CO2 laser.

【Quick Fixed Focus Architecture】 - The S9 laser module has the fastest focus architecture available in the industry.

It incorporates both a sliding design and a fixed focus lens.

All you have to do to finish focusing is slide the laser and tighten the screws.

Because of this, using the laser is quite easy.

Its sliding fixed focusing feature remains unchanged when used on different devices.

The laser filter cover blocks 98% of UV radiation from entering the eyes, resulting in a "Circle Eye Protection Cover Design." Wearing goggles is not necessary to view laser engraving from all angles for you and those around you.

It can also stop animals from focusing on the laser light.

The S9 Pro laser head of the laser engraver is fitted with a standard 12V/PWM modulation board, which may be modified to fit standard CNC or GRBL motherboards.

Details are available by viewing the product images.


Three (3) FAHKNS Molybdenum Reflective Lenses, Diameter: 30 mm/1.18" T3mm Mo Mirror Laser Lens for CO2 Laser Cutting, Engraving, and Cutting Equipment, 40W–200W

Principal parameters: diameter (30 mm/1.18 in), thickness (3 mm/0.118 in).

[HIGH TEMPERATURE AND CORROSION RESISTANCE]: Made from premium molybdenum, this material has an application power range of 40W to 200W, a high melting point, high surface strength, chemical stability, high temperature, and corrosion resistance.

It can be used with a variety of laser engraving, etching, marking, and cutting devices.

[SCRUB RESISTANT, LONG LIFE]: Metal molybdenum is polished straight to a mirror finish; there is no coating layer on the surface; it is scrub resistant and long-lasting.

It reflects more than 98% of infrared light at the crucial wavelength of 10600 nm, significantly reducing power loss from the laser tube to the worktop.

A laser machine typically requires one focal lens and three reflecting lenses for installation.

[APPLICATION]: Engraving is appropriate for laser lenses with focal lengths of 25.4 mm, 38.1 mm, and 50.8 mm.

When using laser lenses for cutting, we advise using those with a focal length of 63.5/76.2/101.6/127mm.


ATOMSTACK Maker AC1 Camera for Laser Engraver: 5MP Pixel HD Industrial Digital Camera with Auto Precise Positioning, Capable of Multi-Task Engraving and Preview, Compatible with LightBurn for Wide Angle Video Recording

【Industrial Digital Camera for Laser Engraver】 - The ATOMSTACK MAKER camera is a true 500W pixel high-definition industrial digital camera, which distinguishes it from other electronic cameras and guarantees precise positioning and high-definition picture capture when in operation.

Not only can it record and examine wide-angle videos, but it can also automatically position itself and accomplish multitasking engraving.

【Auto Precise Positioning & Capturing】: This industrial CNC router assist camera conforms to the depth specifications of LightBurn software, making it ideal for laser engraving machines.

With just a little calibration, it can achieve area finding engraving and automatically determine the object's working position with a positioning inaccuracy of less than 1mm.

To put it simply, once the engraving area and objects have been automatically positioned, you may update the engraving content with ease because everything will be reflected on LightBurn.

【Multitasking Engraving & Work Preview】 - By allowing you to design directly on the consumables' surface, this preview capability can effectively address the positioning issue of uneven patterns.

However, it does realize carving while multitasking.

The engraving machine can perform several separate operations at once thanks to the camera's precise placement.

The laser will automatically locate each carving object and complete the job under the camera's instruction.

【HD Video Recording with Wide Angle】: This camera is equipped with an industrial wide-angle lens that has a 400*400mm shooting range.

It is ideal for frame engraving machines that have a 450*450mm frame.

The engraving and cutting become visible and observable as a result of the camera's delayed shooting, which records the entire task completion process.

You might receive surprisingly high traffic and attention by sharing your artistic movies with others or on the network platform.

Wide Compatibility & High Adaptability】 Specifically designed to work in tandem with the computer L


Premium Long-Lasting Sand Blasting Media, High Abrasive Force Sand Blaster Sand for Metal, Sandblasters, Blasting Cabinet, and Blasting Guns - Tonmp 8 LBS 80 Grit Aluminum Oxide Blast Media

Eight pounds of 80-grit aluminum oxide sandblasting media for use in blast cabinets or blast guns Compared to most blasting media, virgin brown aluminum oxide is harder.

As intended, the media evenly etched the glass.

performed flawlessly in your blasting cabinet.

Strong, precise, reusable, and incredibly efficient angular grit.

It is non-reactive and won't affect your coatings when you prepare the surface.

In total, there are three bags.

Two pounds of abrasive are contained in each bag.

You can reuse the sealed bags to keep the abrasive away from the air's moisture.


BURNLAB Air Support for Laser Engraver and Cutter,Air Pump Accessories, Wood and Metal Laser Engraver, and Adjustable 30L/Min Airflow are all included in this Air Assist Pump Kit. Light Noise, Air Nozzle

"Only AIr Assist Pump Kit!" An ideal add-on for carving machines! Lithium Battery Manufacturers

Use requires pairing with a carving machine!

【Decrease The Machine's Surface Temperature】: Good BURNLAB air-assisted accessory modules efficiently use air to swiftly lower the cutting object's surface temperature, avoid heat-related deformation and discoloration, and improve the cutting edge's clarity and cleanliness by dissipating heat.

This laser air assist nozzle can help you achieve better artistic effects while saving time!

【Laser Head Protection】: The BURNLAB air assist device is intended for use with the laser engraving machine's air assist system.

Its steady air output system may clear smoke and debris produced during operation, shield the laser head lens from contaminants, and increase the laser head's servicing life.

【Removal of Smoke and Dust, More Stable Work】: The BURNLAB laser engraver air assist pump kit has an adjustable air flow rate of 10–30 L/min and a reasonable and appropriate air flow intensity setting.

This allows it to efficiently remove debris and smoke produced during laser carving, prevent laser energy attenuation brought on by smoke and dust, guarantee the stability of laser energy, and safeguard human health.

Your carving and cutting tasks will yield the greatest results because to the superior air auxiliary!

【60DB Low Decibel】: The air assist pump kit for the BURNLAB laser engraver offers the benefits of less vibration and noise.

You may work in a quiet, pleasant, and distraction-free atmosphere knowing that even with the air flow set to its highest setting, the noise level produced during operation will not exceed 60 dB.

【Introductory Features】: This superior Laser Air Assist Laser Engraver is lightweight, portable, and requires only five minutes to set up.

It is portable and requires little room for use at any workspace.

Additionally, all BURNLAB engraving machine models are compatible with the BURNLAB air assist tube, which offers more


FAHKNS Portable Laser Engraving Machine 5W Foldable Laser Cutter 0.05mm High Precision Engraver for Wood Leather Metal

High Precision & Superb Penetration: The laser engraving machine has 5W compressed spot output power.

The displacement of the laser module can be controlled more accurately to 0.05mm, the engraving speed can reach 600MM/S, making your engraved images more detailed and cutting capacity stronger than other machines.

Wide Software Compatibility: The best portable laser engraver and cutter machine can transfer data via Bluetooth, USB data cable.

It supports WIN7/WIN8/WIN10/IOS/MAC/ANDROID System.

Supported file formats: JPEG/BMP/GIF/PNG/JPG/XJ/PLT/DXF/HPGL.

The engraving machine can engrave: paper, cardboard, wood, leather, acrylic, anodized/painted aluminum, stainless steel, etc.

; cannot engrave: pure metal, PVC, PET and other plastics; can cut: wood, paper, leather (thickness within 0.2 inches).

Foldable Engraving Machine: With an innovative folding and compact design, you can take the Z3 Portable Laser Cutter outdoor easily.

it can be folded to the size of a pocket, eliminating the need for cumbersome disassembly and assembly steps.

Truly realize plug and play without any assembly operations, easy for use.

Multiple Engraving Modes: For the engraving needs of irregular objects, laser module comes with an adjustable function to meet the engraving needs of different angles.

You can move the laser head up and down according to your needs.

Worry-free After-sales: If you have any dissatisfaction after receiving the package, please contact us in time, we will reply you within 24 hours.


High precision quad-compression spot laser head with high accuracy, capable of engraving over 340 colors on metal steel. LASER TREE 20W Optical Power Laser Module for Laser Engraver Cutter, 80W Laser Engraver Module with Air Assistance

【STRONG LASER MODULE】With an optical power output of up to 24W, discover the true power of LASER TREE's 20W laser module.

A 20W laser cutter module with high power can cut 10mm bass plywood in a single pass and 8mm black acrylic in a single pass.

Up to 24000 mm/min of engraving speed.

This potent laser module will assist you in getting the outcomes you require, regardless of your level of experience.

The Laser Tree 20W laser head has four 5W beam-compressed laser diodes.

It is an ultra-fine compressed spot laser.

The engraving and cutting are more forceful and accurate with the quadruple compression spot (0.08*0.08mm).

30mm wooden boards, 30mm acrylic sheets, and 0.1mm stainless steel can all be cut with it.

The 20W module expands your creative possibilities by enabling you to engrave over 340 colors on stainless steel.

The Laser Tree 20W laser head has four 5W beam-compressed laser diodes.

It is an ultra-fine compressed spot laser.

The engraving and cutting are more forceful and accurate with the quadruple compression spot (0.08*0.08mm).

30mm wooden boards, 30mm acrylic sheets, and 0.1mm stainless steel can all be cut with it.

The 20W module expands your creative possibilities by enabling you to engrave over 340 colors on stainless steel.

【Easy to use and wide compatibility】Compliant with 3D printers, CNC machines, PWM-controlled laser engraving, and cutting equipment.

Integrating the supplied accessories with your current machine is simple.

fitted with a power adapter and adapter board that can handle varying voltages and pin configurations between the machine and the module.

The design of the focus lever facilitates simpler focus adjustment.

It is also simple to mount the module on the machine thanks to the mounting bracket【AFTER-SALE & Technical Assistance】 Please use the 24 V external power supply and adapter board that we have provided to ensure that the laser module operates at 100%.

Please use the website or to get in touch with us if you have any questions or if you need pre-sale


Using a 5W output power and a 500*500mm honeycomb working table, the Creality laser engraving machine boasts a laser honeycomb bed for enhanced accuracy.

【ENCYCLICAL FOR BEGINNERS】The machine's cutting capacity is indicated by the 5W engraver laser output power, while the laser machine's power is 40W.

This laser engraver and cutter is ideal for individuals who are merely interested in laser engraving and cutting because it can cut 4mm wood in one pass and engrave the majority of products.

【More Precise Engineering‑Using an ultra-fine 0.06mm*0.06mm compression spot, this laser cube cutter is perfect for engraving intricate patterns on metal and wood, leaving a clean surface with minimal burn marks.

The processing speed can reach 400 mm/s and 24000 mm/m with the high-power laser module and the recently improved algorithms.

Improved Heat DissipationThe Laser Honeycomb bed's 8 mm large aperture honeycomb design minimizes fire risk and product yellowing while achieving optimal air circulation and quicker heat dissipation and smoother smoke evacuation.

【Optimal Cutting Outcome】The employment of a honeycomb working panel guarantees ideal air circulation throughout the cutting process, diminishing smoke, soot, or workpiece warping.

It actually improves your cutting experience by minimizing smoke and charring on the back of the workpiece when cutting.

In addition to its ability to absorb and deflect lasers and debris, the Honeycomb Working Table also has the dual desktop protection feature of preventing excessive combustion.

To avoid laser burns on the workbench during cutting, place a metal aluminum plate the same size as a honeycomb plate on it.


Top