DIY Arduino UNO R3 Shield Board 4X Prototype PCB
DIY Arduino UNO R3 Shield Board prototype PCB.
Several lots of four pieces.
PCB Size: 68.58 x 53.34 mm (2.7 x 2.1") PCB FR-4 glass fiber PCB, high quality, 1.6mm (0.063") thick.
All holes have through plating.
There are identical copper layers on the top and bottom.
Pads grid (pitch): 2.54 mm/0.1", hole diameter: 0.9 mm.
Arduino-compatible EPLZON Solderable Breadboard Mini PCB Board Gold-Plated Solder Breadboard for Do-It-Yourself Electronics Projects 2.0"x1.5" Mixed Color (12 Pieces per Pack)
Price: $16.99
This board is particularly helpful for conserving a prototype or experiment that you have just assembled on a solder-free breadboard.
Compatible with a wide range of MCU boards, including Arduino Nano, ESP8266, NodeMCU, and others; appropriate for any kind of Raspberry Pi GPIO breadboard PCB.
All holes are through-plated for mounting strength and have a high-quality gold finish to prevent oxidation and make soldering easier.
12pcs multi-color tiny PCB for small-scale prototyping, featuring two of each of the following colors: yellow, blue, red, black, white, and green.
RoHS-compliant and lead-free for a longer shelf life
Gold-plated, 3.8"x3.5", Snappable Strip Board with Power Rails for Electronics Projects Compatible for Do-It-Yourself Arduino Soldering Projects, ElectroCookie PCB Prototype Board (6 Pack, 3 Blue+3 Black)
Price: $17.99
helpful in converting prototypes into trustworthy permanent circuits For flexible prototyping uses, snaps into 4 tiny boards.
ability to work with a wide range of MCU boards.
Compatible with ESP8266, NodeMCU, Arduino Nano, etc.
All holes are through-plated in gold to prevent oxidation and to increase mounting strength.
RoHS-compliant, lead-free, and with a longer shelf life
20-piece Double Sided PCB Board Prototype Kit from NewZoll Universal Printed Circuit Board for Electronic Projects and Do-It-Yourself
Electronic component type Name: PCB for an adapter Front side pin pitch is 0.8mm, and the back side pin pitch is 0.5mm.
Dimensions are 30.48 x 30.48mm/1.2" x 1.2".
Please pay attention: Check the size before purchasing.
Prototype Expansion Board Opening Source Reset Button PCB Bareboard D13 Universal LED for Arduino UNO R3 from WWZMDiB
Arduino UNO R3 Proto Screw Shield:You may connect this shield to an Arduino by plugging it into the pins on the bottom of the shield that match the female connections on an Arduino.
⚡The middle can be utilized as a prototype expansion board when combined with Proto Shield.
To prevent losing them when you attach the shield to it, it has female connectors on the top that match those on the Arduino.
Provide a handy port connection and an Arduino IO terminal.
The small bread plate's center can be used as a convenient experimental extension.
Uncut Strips, 1 Sided PCB, Size 1 = 50 x 80mm (1.97 x 3.15in), ST1 (Two-Pack) StripBoard
Two ST1 prototyping boards in a package.
The typical stripboard pattern has tracks that go the entire length of the board.
High-quality FR4 glass-epoxy circuit board that is single-sided.
For simple soldering, 1 oz/ft2 copper with an anti-tarnish coating is used.
RoHS compliant and lead-free.
0.037" holes are drilled on 0.1" (2.54mm) centers, resulting in 31 x 19 holes in 19 strips.
Mounting holes every 0.125" apart.
Size 1 is 50 × 80 mm (1.97 x 3.15 in), and it is 1.6 mm thick.
(2 in 1) 6PCS Breadboard with a digital logic probe TTL, CMOS, LSI, and all logic levels (3.3V and 5V) are possible. There are HIGH, LOW, and HIGH Impedance LED indication lights. translucent acrylic box with retractable probe? Interlocking bread
Pcb prototype board; the prototype boards are red.
Composition: 94HB baking board for prototyping PROTOBOARD FEATURES: The boards are single-sided and thick.
It is very simple to solder components onto the plated holes because they are pre-coppeered and very sturdy.
Thickness: around 1.2 mm; Hole Pitch: approximately 2.54 mm; Hole Diameter: approximately 1.0 mm PACKAGE 20 pieces of a universal PCB board
For the Arduino Mega R3 2560, KEYESTUDIO 10PCS Double Sided PCB Prototype Shield is solderable.
Price: $12.99
10 pieces of prototype circuit boards are included in the good value PCB DIY kit, which also comes in a lovely package.
The pin headers and four mounting holes at the corners make it the perfect size to plug into the Arduino Mega Board.
Proto boards made of high-quality, robust glass fiber, thick, and double-sided You may simply solder components and sensors for your projects without making mistakes thanks to the board's pre-tinned plated holes and very practical clear yellow pin labels.
With a hole-pitch of 2.54mm (0.1inch) and a hole diameter of 1mm (0.04inch), medium-sized wire can be attached quickly.
Universal PCB Breadboard for Proto Shield Distribution Connecting Blocks by CenryKay 400 Tie Points Solderless Prototype Kit (4 pieces)
A 400-tie result Breadboard without Solder.
These tiny breadboards are ideal for testing and prototyping Arduino Shield.
PP plastic body in white with a black legend printed on it.
Strips of distribution have a color legend.
For prototypes, circuit design experiments, and other do-it-yourself tasks, a solderless breadboard is practical.
a little breadboard Make attaching the Prototype Shield to the wall simple by providing self-adhesive tape on the back.
Excellent for projects involving breadboard jumper wires and other electrical DIY kits.
15x20cm (4 Pack) Single Sided Universal PCB Prototype Soldering Circuit Board
high caliber single-sided PCBs that are 1.6 mm thick There are four 15x20 PCB parts in the package. China wholesale Long PCB Supplier
Standard component hole pitch is 2.54 mm (0.1 inch).
These are shipped in bulk packaging that is first bubble-wrapped or cardboard-lined before being shrink-wrapped.
2024 all-time favorite pcb stackup calculator
.jpg?x-oss-process=image/resize,p_100/format,webp)
